FortiClient EMS 7.2 End of Support: August 1, 2027
FortiClient EMS 7.2 reaches End of Support on August 1, 2027, and FortiClient EMS 7.4 reaches End of Support on December 3, 2028. Those are the End of Support Dates (EOS) Fortinet lists for the two lines. Each line has an earlier milestone, the End of Engineering Support Date (EOES). For EMS 7.2 it has passed: it was February 1, 2026, so 7.2 is now in the phase that Fortinet's Product Life Cycle page calls "Must Fix" support. EMS 7.4 is in engineering support until June 3, 2027. The lifecycle dates on this page are from Fortinet's Product Life Cycle data, which we read directly.
Key Dates at a Glance
- FortiClient EMS 8.0: released 2026-07-02; End of Engineering Support 2029-07-02; End of Support 2031-01-02
- FortiClient EMS 7.4: released 2024-06-03; End of Engineering Support 2027-06-03; End of Support 2028-12-03
- FortiClient EMS 7.2: released 2023-02-01; End of Engineering Support 2026-02-01; End of Support 2027-08-01
- FortiClient EMS 7.0: released 2021-04-27; End of Engineering Support 2024-04-27; End of Support 2025-10-27
- CVE-2023-48788: added to CISA KEV 2024-03-25
- CVE-2026-35616: added to CISA KEV 2026-04-06
- CVE-2026-21643: added to CISA KEV 2026-04-13
FortiClient EMS lines and their dates
| EMS line | Release Date (GA) | End of Engineering Support Date (EOES) | End of Support Date (EOS) |
|---|---|---|---|
| FortiClient EMS 8.0 | July 2, 2026 | July 2, 2029 | January 2, 2031 |
| FortiClient EMS 7.4 | June 3, 2024 | June 3, 2027 | December 3, 2028 |
| FortiClient EMS 7.2 | February 1, 2023 | February 1, 2026 | August 1, 2027 |
| FortiClient EMS 7.0 | April 27, 2021 | April 27, 2024 | October 27, 2025 |
| FortiClient EMS 6.4 | May 12, 2020 | May 12, 2023 | November 12, 2024 |
Column names are Fortinet's own, from the Software tab of its Product Life Cycle page, where the product is listed as FortiClient Enterprise Management Server (EMS). Every line older than 7.2 is past its End of Support date; all of them are on our FortiClient EMS page. Fortinet lists the FortiClient endpoint software for Windows, Mac and Linux as separate entries with their own dates; this guide covers the EMS server.
What Fortinet's two dates mean
Fortinet prints its Software Support Policy above the tables on its Product Life Cycle page. It applies to firmware for appliances and to applications installed on customer systems, which is what EMS is. This is what it says, in order.
- From release to EOES: engineering support. Fortinet provides Engineering Software support for thirty-six months from the GA release date of a major or minor release. For EMS 7.2 that period ended on February 1, 2026.
- From EOES to EOS: "Must Fix" support. Fortinet provides what the page calls "Must Fix" support for a further eighteen months from the End of Engineering Support date. For EMS 7.2 this phase is the period up to August 1, 2027.
- The latest patch release. The policy says support is provided on the latest patch release of each version. An EMS 7.2 server that is behind the newest 7.2 patch is outside that sentence, whatever the date.
- After EOS. The page describes End of Support as the final milestone. After it, Fortinet will not sell, manufacture or improve the product and "is under no obligation to provide support services".
The page does not list what qualifies as a Must Fix. The fuller definitions are in the Fortinet Product Life Cycle Policy document that the page links to. Fortinet's dates for EMS 6.4 through 8.0 match the policy's arithmetic to the day: EOES is thirty-six months after release and EOS is eighteen months after EOES.
FortiClient EMS in CISA's Known Exploited Vulnerabilities catalog
CISA's catalog lists 3 FortiClient EMS vulnerabilities. The affected versions and solutions below are copied from the Fortinet advisory for each one.
| CVE | Fortinet advisory | Added to CISA KEV | Affected EMS versions in the advisory | Solution in the advisory |
|---|---|---|---|---|
| CVE-2023-48788 | FG-IR-24-007 | March 25, 2024 | 7.2.0 through 7.2.2; 7.0.1 through 7.0.10. EMS 6.4: not affected | Upgrade to 7.2.3 or above; upgrade to 7.0.11 or above |
| CVE-2026-35616 | FG-IR-26-099 | April 6, 2026 | 7.4.5 through 7.4.6. EMS 7.2 and 8.0: not affected | Upgrade to 7.4.7 or above |
| CVE-2026-21643 | FG-IR-25-1142 | April 13, 2026 | 7.4.4. EMS 7.2 and 8.0: not affected | Upgrade to 7.4.5 or above |
Two things in this table matter for planning.
- The two 2026 entries are in EMS 7.4, not 7.2. Fortinet's advisories list EMS 7.2 as not affected by either. A move from 7.2 to 7.4 should land on a 7.4 patch release at or above the ones those two advisories name, not on an early 7.4 release.
- Each fix is a newer patch release. In every affected row the advisory's solution is to upgrade to a later patch of the same line. Being on a supported line is not enough.
CVE-2023-48788 is the entry CISA marks as known to be used in ransomware campaigns. Read the advisory itself before acting on any row: Fortinet revises advisories, and each one carries its own notes.
Moving off EMS 7.2: what Fortinet's release notes say
The move from 7.2 is a change of platform, not only a change of version. These points are from the FortiClient EMS 7.2.15, 7.4.8 and 8.0.1 release notes on Fortinet's documentation site.
- EMS 7.2 runs on Windows Server. The 7.2.15 release notes list Windows Server 2025 and Windows Server 2022 as its server operating systems.
- EMS 7.4 and 8.0 run on Linux. The 7.4.8 release notes and the 8.0.1 release notes list Ubuntu 22.04 and 24.04, Red Hat Enterprise Linux 9 and CentOS Stream 9. Those systems have end dates of their own: see our Ubuntu, RHEL and CentOS Stream pages.
- There is a migration tool from 7.2 to 7.4. The 7.4.8 release notes say the EMS migration tool can migrate a Windows Server-based EMS 7.2 to the Linux-based EMS 7.4. They also list legacy license types that EMS 7.4.8 does not support, and say the tool aborts the migration if EMS 7.2 uses one.
- There is no direct route from 7.2 to 8.0. The 8.0.1 release notes say 8.0 does not support direct migration from 7.2, and that EMS 7.2 users must first migrate to a supported 7.4 version.
- There is no way back. The 7.4.8 release notes say FortiClient EMS does not support downgrading to previous EMS versions.
- The endpoints have to keep up. The 7.2.15 release notes say EMS 7.2.15 only supports FortiClient 7.2 and 7.0. The 7.4.8 release notes list FortiClient 7.4.0 and later and 7.2.0 and later for Windows, macOS and Linux. The 8.0.1 release notes list 8.0.0 and later and 7.4.0 and later. By those lists, endpoints on FortiClient 7.2 can stay on 7.2 through the move to EMS 7.4, and need FortiClient 7.4 or later before the server goes to 8.0.
The lines above 7.2
- FortiClient EMS 7.4 is in engineering support until June 3, 2027 and reaches End of Support on December 3, 2028. It was released on June 3, 2024.
- FortiClient EMS 8.0 is in engineering support until July 2, 2029 and reaches End of Support on January 2, 2031. It was released on July 2, 2026.
What a FortiClient EMS owner should plan
- On EMS 7.0 or older: the line is past End of Support. EMS 7.0 passed its EOS date on October 27, 2025. Move to a line that is still inside a support phase.
- On EMS 7.2: get to the newest 7.2 patch release first. Fortinet's policy ties support to the latest patch release of each version. Fortinet's FortiClient 7.2 documentation lists the EMS release notes for each one.
- Plan the move to 7.4 as a server migration. It needs a Linux server from the list in the release notes and a license type the target release accepts. Fortinet's EMS migration tool is the route its release notes describe. Because there is no downgrade, keep the 7.2 server intact until the 7.4 server is confirmed.
- Land on a current 7.4 patch. Fortinet's advisories for both 2026 entries in CISA's catalog give a later 7.4 patch release as the solution. Check the two advisories in the table above against the release you install.
- Treat 8.0 as the step after 7.4. Fortinet's release notes route 7.2 through 7.4. Endpoints need FortiClient 7.4 or later before the server moves to 8.0.
- On EMS 7.4: engineering support runs to June 3, 2027. Put both 7.4 dates in the asset register, and stay on the newest 7.4 patch.
The EOL Checker looks up one product and version. The end-of-support edge device list covers the Fortinet devices at the network edge.
Frequently Asked Questions
When does FortiClient EMS 7.2 reach end of support?
FortiClient EMS 7.2 reaches End of Support on August 1, 2027. Its End of Engineering Support date was February 1, 2026. Both dates are from Fortinet's product life cycle data.
When does FortiClient EMS 7.4 reach end of support?
FortiClient EMS 7.4 reaches End of Engineering Support on June 3, 2027 and End of Support on December 3, 2028.
Is FortiClient EMS 7.0 still supported?
No. FortiClient EMS 7.0 passed its End of Support date on October 27, 2025. Its End of Engineering Support date was April 27, 2024.
Can FortiClient EMS 7.2 be upgraded straight to 8.0?
No, by Fortinet's FortiClient EMS 8.0.1 release notes. They say 8.0 does not support direct migration from 7.2, and that EMS 7.2 users must first migrate to a supported 7.4 version.
Does FortiClient EMS 7.4 run on Windows Server?
No. Fortinet's release notes describe EMS 7.2 as Windows Server-based and EMS 7.4 as Linux-based. The FortiClient EMS 7.4.8 release notes list Ubuntu 22.04 and 24.04, Red Hat Enterprise Linux 9 and CentOS Stream 9 as server operating systems. Fortinet provides an EMS migration tool for the move from 7.2 to 7.4.
Which FortiClient EMS vulnerabilities are in CISA's Known Exploited Vulnerabilities catalog?
CISA's catalog lists 3 FortiClient EMS vulnerabilities: CVE-2023-48788, added on March 25, 2024; CVE-2026-35616, added on April 6, 2026; and CVE-2026-21643, added on April 13, 2026. Fortinet's advisories give the affected versions and the fixed release for each.
Which FortiClient EMS version has the longest support left?
FortiClient EMS 8.0. Its End of Engineering Support date is July 2, 2029 and its End of Support date is January 2, 2031.
What is the difference between EOES and EOS for FortiClient EMS?
End of Engineering Support (EOES) closes the engineering support period, which Fortinet's Product Life Cycle page sets at thirty-six months from the GA release date. End of Support (EOS) comes eighteen months later, at the end of the phase the page calls Must Fix support. After EOS, the page says Fortinet is under no obligation to provide support services.
Related
- FortiClient EMS — every line, live status and EOL Risk Score
- FortiOS 7.4 end of support
- FortiAuthenticator 6.6 end of support
- FortiManager 7.2 end of support
- Windows Server — the operating system under EMS 7.2
- How we verify our dates