endoflife.ai
Juniper MX and M Series MX204 Junos OS EOL Checker

Juniper MX Series End of Life: Last Order and End of Support Dates, Model by Model

By Scott Bissett  ·  Published: November 21, 2026  ·  Reference guide  ·  Dates read from Juniper's M (M, MX) Series Hardware Dates and Milestones page at support.juniper.net on the day of publication and re-checked at every site build; milestone definitions from Juniper's Product End of Life Policy and Procedure.

Juniper's Last Order date for the MX204 router is June 15, 2027, and the End of Support date on its hardware row is June 30, 2032. Juniper's End of Support date is March 15, 2028 for the MX104, June 30, 2028 for the MX150, April 3, 2029 for the MX10003 and MX10016, September 15, 2031 for the MX2008 and January 30, 2033 for the MX2010 and MX2020. The source is Juniper's M (M, MX) Series Hardware Dates and Milestones page, where Juniper publishes the MX dates beside the older M Series routers. The Last Order dates of every model in that sentence except the MX204 have passed. Juniper's page has no chassis row for the MX240, MX480 or MX960. Live status and EOL Risk Score for every model are on the Juniper MX and M Series page.

Quick answer: MX204 (TSB107750): Last Order June 15, 2027, End of Engineering June 15, 2030, End of Support June 30, 2032; the earlier MX204, MX204-IR, MX204-R and MX204-P-BASE part numbers have an End of Support date of June 15, 2032. MX104: End of Support March 15, 2028. MX150: June 30, 2028. MX10003 and MX10016: April 3, 2029. MX2008: September 15, 2031. MX2010 and MX2020: January 30, 2033. MX240, MX480 and MX960: no chassis row on Juniper's page. The MX5, MX10, MX40 and MX80 reached End of Support on June 30, 2026.

Key Dates at a Glance

Running Juniper MX Series past end of life?
Extended support past the official EOL date exists for many products in this position — whether it covers Juniper MX Series is exactly what we check. Tell us where to reach you and we’ll reply with matched options and pricing guidance — or an honest “no vendor covers this.” Free, no obligation.

Free · No obligation · Independent — we track the dates, vendors don’t pay for placement · dates verified against vendor sources. See all support options →

Juniper MX dates, model by model

Juniper's page is a list of part numbers under each announcement. This table maps its rows to the models people run, in End of Support order. Juniper keeps two tables on the page: a newer one with End of Hardware Failure Analysis, End of Engineering and Last Software Version columns, which holds the MX204, MX2008, MX2010 and MX2020, and an older one kept as historical data, which holds every other model and has no End of Engineering column. The three chassis at the bottom have no chassis row on the page.

ModelAnnounced (notice)Last OrderEnd of EngineeringEnd of Support
MX104September 30, 2022 (MX104 notice)March 15, 2023Not printed (older table)March 15, 2028
MX150December 31, 2022 (MX150 notice)June 30, 2023Not printed (older table)June 30, 2028
MX10003June 13, 2022 (MX10003 notice)April 3, 2023Not printed (older table)April 3, 2029
MX10016June 13, 2022 (MX10016 notice)April 3, 2023Not printed (older table)April 3, 2029
MX2008March 15, 2026 (TSB106476)September 15, 2026September 15, 2029 (MX2008)September 15, 2031
MX204 (hardware row)June 15, 2026 (TSB107750)June 15, 2027June 15, 2030 (MX204)June 30, 2032
MX2010 (base and premium systems)August 15, 2026 (MX2010, TSB109955)August 15, 2026January 30, 2032 (MX2010)January 30, 2033
MX2020 (base and premium systems)August 15, 2026 (MX2020, TSB109955)August 15, 2026January 30, 2032 (MX2020)January 30, 2033
MX240No chassis rowNone publishedNone publishedNone published
MX480No chassis rowNone publishedNone publishedNone published
MX960No chassis rowNone publishedNone publishedNone published

Models already past End of Support, from the MX80 back to the M40, are in the second table further down.

MX204: every milestone, and two End of Support dates

Juniper's End of Life announcement for the MX204 product is TSB107750. Its hardware row lists 32 part numbers. These are all the columns of that row.

Juniper's columnMX204 hardware row (TSB107750)
EOL AnnouncedJune 15, 2026 (TSB107750 announcement)
Last OrderJune 15, 2027
End of Hardware Failure AnalysisJune 15, 2028 (MX204 row)
End of EngineeringJune 15, 2030 (MX204 row)
Last Software VersionJunos OS 27.4
End of SupportJune 30, 2032

Part numbers on the hardware row. MX204-HW-BASE, MX204-HWBASE-AC-FS, MX204-HWBASE-DC-FS, JNP204, JNP204-CHAS, JNP204-CHAS-BB, JNP204-RMK and JNP-PWR-BLNK-1; the sixteen B-MX204 part numbers (B-MX204-1, -5, -10 and -20, each in AC and DC, ADV and PRM); and eight part numbers that start with S-MX204-S-SECI or S-MX-4C. A second row of the same notice lists six more part numbers that start with S-; on that row the Last Order cell is the same day as the End of Support cell and the End of Hardware Failure Analysis cell reads N/A.

The earlier MX204 part numbers have a different End of Support date. Juniper's page has two more MX204 rows, both titled as a SKU transformation made into a formal End of Life announcement: TSB17959 for the part numbers MX204, MX204-IR and MX204-R, and TSB17960 for MX204-P-BASE and MX204PBASE-AC-1-FS. Their Last Order dates have passed. Their End of Hardware Failure Analysis and End of Engineering cells match the hardware row above, and both rows have an End of Support date of June 15, 2032, earlier than the June 30, 2032 of the hardware row. This site's MX204 date is the hardware row's. If the part number on your unit is MX204, MX204-IR, MX204-R or MX204-P-BASE, plan against the earlier date.

Software. Juniper's rows list Junos OS 27.4 in the Last Software Version column for the MX204. Junos OS 27.4 was not yet listed on Juniper's Junos OS dates page when this guide was published, so there are no software dates to set beside the hardware dates. The Junos OS page tracks every release line Juniper has dated.

MX2010 and MX2020: off order on the day of the announcement

Juniper's End of Life announcement for the MX2010 and MX2020 is TSB109955, dated August 15, 2026. The row for the base and premium systems has a Last Order date of the same day, August 15, 2026, so the systems went off order on the day of the announcement. These are all the columns of that row.

Juniper's columnMX2010 and MX2020 system row (TSB109955)
EOL AnnouncedAugust 15, 2026 (TSB109955 announcement)
Last OrderAugust 15, 2026
End of Hardware Failure AnalysisFebruary 15, 2028 (system row)
End of EngineeringJanuary 30, 2032 (system row)
Last Software VersionJunos OS 27.4
End of SupportJanuary 30, 2033

Part numbers on the system row. The row lists 40 part numbers, among them MX2010-BASE-AC, MX2010-BASE-DC, MX2010-PREMIUM-AC, MX2010-PREMIUM-DC, MX2010-PREMIUM2-AC, MX2010-PREMIUM2-DC and the same six for the MX2020; CHAS-BP-MX2010-BB and CHAS-BP-MX2020-BB; MX2000-SFB3-BB; the REMX2K-X8-64G and REMX2K-X8-128G part numbers; and the -BB power and fan tray part numbers.

Spares can be ordered for longer. A second row of TSB109955 lists 20 spare and packaging part numbers, among them CHAS-BP-MX2010-S, CHAS-BP-MX2020-S, MX2010-CRAFT-S and MX2020-CRAFT-S. Its Last Order date is February 15, 2027, and its other dates match the system row.

Not every part shares the system dates. The MX2000-SFB2 part numbers (MX2000-SFB2-BB, MX2000-SFB2-R and MX2000-SFB2-S) are on rows of the same notice with an earlier End of Engineering date and an earlier End of Support date than the chassis. The MX2000-LC-ADAPTER and two MX2K-PDM-OP part numbers have an earlier End of Engineering date. A separate notice, TSB106686, gives eight MX2K-PSM-HV, MX2K-PDM-HV and MX2K-HV-CBL-MGR part numbers an End of Support date earlier still. A chassis that holds SFB2 or PSM-HV and PDM-HV parts has parts that pass End of Support before the chassis does, so read Juniper's row for each part number.

MX2008

Juniper's End of Life announcement for the MX2008 chassis and its components is TSB106476, dated March 15, 2026. The row lists 21 part numbers, among them MX2008-BASE, MX2008-PREMIUM, CHAS-MX2008-BB, CHAS-MX2008-S, the MX2008-SFB2 part numbers and the REMX2008-X8 part numbers. Its Last Order date was September 15, 2026. The End of Engineering date for the MX2008 is September 15, 2029 and its End of Support date is September 15, 2031.

Software. The row lists Junos OS 23.4 as the last software version. On Juniper's Junos OS dates page, Junos OS 23.4 has an End of Engineering date of December 26, 2028 and an End of Support date of June 26, 2029, and a note on that row extends both for the MX2008 part numbers listed in TSB106476: End of Engineering to September 15, 2029 and End of Support to September 15, 2031. So for the MX2008 the last Junos OS release runs to the hardware dates. See Junos OS 23.4.

MX104, MX150, MX10003 and MX10016: rows on the older table

These four models are on Juniper's older table. It has no End of Engineering column. It prints Last Date to Convert Warranty, Same Day Support Discontinued and Next Day Support Discontinued instead.

MX104. Juniper's row lists 44 part numbers, among them MX104-AC, MX104-DC, MX104-T, MX104-PREM-T, the MX104-40G, MX104-80G and MX104-PREM bundles, MX104-MX5-AC, MX104-MX5-DC, CHAS-MX104-S and the RE-S-MX104, PWR-MX104 and FANTRAY-MX104 part numbers. The Last Order date was March 15, 2023. Same Day Support Discontinued, Next Day Support Discontinued and End of Support all carry one date, March 15, 2028. Juniper's Junos OS dates page has a note on Junos OS 21.2 for this router: End of Engineering extended to December 31, 2025 and End of Support extended to March 15, 2028 for the MX104. That End of Engineering date has passed. Under Juniper's policy, End of Engineering is the date after which Juniper is no longer committed to bug fixes and patches, while maintenance support continues to End of Support.

MX150. Juniper's row lists MX150, MX150-IR and MX150-R and their three TAA variants. The Last Order date was June 30, 2023 and the End of Support date is June 30, 2028. Same Day and Next Day Support Discontinued carry the same date as End of Support.

MX10003. Juniper's row lists 26 part numbers, among them MX10003-BASE, MX10003-PREMIUM, JNP10003, JNP10003-CHAS, the JNP10003-RE1 part numbers and JNP10003-LC2103. The Last Order date was April 3, 2023 and the End of Support date is April 3, 2029. Same Day and Next Day Support Discontinued for the MX10003 are a year earlier, on April 3, 2028.

MX10016. Juniper's row lists MX10016-BASE, MX10016-PREMIUM and the JNP10016 fan and switch fabric part numbers. The Last Order date was April 3, 2023 and the End of Support date is April 3, 2029. Same Day and Next Day Support Discontinued for the MX10016 are on April 3, 2028.

MX10008. Juniper's page has no MX10008 system row. A row with the same dates as the MX10016 lists the JNP10008 fan and switch fabric part numbers and the JNP10K-PWR power supplies only.

MX240, MX480 and MX960: no chassis end date published

Juniper's page names the MX240, MX480 and MX960 many times, and never on a chassis row. What it dates for them:

So, as read on the day this guide was published, Juniper had announced no Last Order, End of Engineering or End of Support date for the MX240, MX480 or MX960 chassis. That is not a promise of how long they will be sold. The page also names no MX304 or MX10004 part number.

A chassis is only as supported as the cards in it. Check each line card, routing engine and control board part number against Juniper's page, and keep the Junos OS release inside its own dates; the Junos OS page tracks every release line.

What each milestone means, in Juniper's terms

Juniper's Product End of Life Policy and Procedure, linked from the milestones page, defines the columns of the newer table. The wording below follows its definitions closely.

Juniper's termJuniper's definitionWhere it appears on this site
Last Order Date (LOD) or End of SaleThe last date on which purchase orders must be placed for the product, and for new support services contracts for it.The support date of each model in our data and API; the notes on the Juniper MX and M Series page say it is Juniper's Last Order date
End of Hardware Failure Analysis Date (EOHFA)The date after which Juniper is no longer committed to troubleshoot a hardware failure and analyse its root cause.Not tracked as a lifecycle date
End of Engineering Date (EOE)The date after which Juniper is no longer committed to furnish engineering level support for the product: bug fixes, further main releases, maintenance releases, service releases and patches.Carried as an extra field for the MX204, MX2008, MX2010 and MX2020; not a tracked lifecycle date
End of Support (EOS)The last date to receive maintenance support: access to Juniper technical support engineers, access to software releases, online tools and hardware replacement. Engineering support is excluded.The EOL Date on the Juniper MX and M Series page and on each model's page

Three more points. An End of Life Notification is a type of Technical Support Bulletin, which is why the notices have TSB numbers; Juniper's page links each bulletin and says a login is required to read it. A customer's right to support of any kind depends on a valid, unexpired support service contract, so the dates are the limits of what a contract can cover, not support a router gets without one. And Juniper's policy sets a guideline for hardware (notification six months before the Last Order date, End of Hardware Failure Analysis one year after it, End of Engineering three years after it, End of Support five years after it) and says a notification may vary from it. The MX2008 row follows the guideline exactly; the MX204, MX2010 and MX2020 rows do not, so read the row, not the rule.

The older table's three columns (Last Date to Convert Warranty, Same Day Support Discontinued, Next Day Support Discontinued) are not defined in the current policy. Juniper's page says it has updated the list of milestones it tracks and keeps the historical ones for reference.

MX and M Series models already past End of Support

Every row below is on Juniper's older table. End of Support has passed for all of them, newest first.

ModelWhat Juniper's row namesLast OrderEnd of Support
MX80The CHAS-MX80 chassis part numbers and the MX80-AC, MX80-DC, MX80-48T, MX80-P, MX80-T and MX80-LE systemsJune 30, 2021June 30, 2026
MX40CHAS-MX40-T-S, MX40BASE-T, MX40-T-AC, MX40-T-DCJune 30, 2021June 30, 2026
MX10CHAS-MX10-T-S, MX10BASE, MX10BASE-T, MX10-T-AC, MX10-T-DCJune 30, 2021June 30, 2026
MX5CHAS-MX5-T-S, MX5BASE, MX5BASE-T, MX5-T-AC, MX5-T-DCJune 30, 2021June 30, 2026
M320M320BASE, M320BASE-AC, M320BASE-DC, the M320BASE-EC systems, CHAS-BP-M320-SMay 1, 2016December 31, 2022
M120M120BASE-AC, M120BASE-DC, CHAS-MP-M120-SMay 1, 2016December 31, 2022
M10iM10iBASE-AC, M10iBASE-DC, CHAS-MP-M10I-SMay 1, 2016December 31, 2022
M7iM7iBASE-AC-1GE, M7iBASE-AC-2FETX, M7iBASE-DC-1GE, M7iBASE-DC-2FETX, CHAS-MP-M7I-1GE-S, CHAS-MP-M7I-2FE-SMay 1, 2016December 31, 2022
M40eM40e PlatformJanuary 31, 2011January 31, 2016
M20M20 platformDecember 31, 2007December 31, 2012
M160M160 platformJuly 31, 2006July 31, 2011
M10M5 and M10 productsJanuary 31, 2005January 31, 2010
M5M5 and M10 productsJanuary 31, 2005January 31, 2010
M40M40 router base systemSeptember 30, 2003September 30, 2008

One row, several models. The MX5, MX10, MX40 and MX80 are on a single row of Juniper's page with 131 part numbers, which also retires the MX-MPC1E, MX-MPC2E, MX-MPC3E and MPC4E line cards, the RE-S-1800X4 16G and 32G part numbers and SCBE-MX. The same announcement covers the selected MX240, MX480 and MX960 bundles, so check a modular chassis for cards and routing engines from this row. The M7i, M10i, M120 and M320 share one row as well.

Why the dates matter for a router

An MX router usually sits at the edge of a network or in its core, so a flaw in it is reachable by a lot of traffic. Junos OS is in CISA's Known Exploited Vulnerabilities catalog: CVE-2025-21590 and CVE-2020-1631 are listed by CISA under the name Juniper Junos OS. Under Juniper's policy, the commitment to bug fixes and patches for a product runs to its End of Engineering date, and access to software releases, support engineers and hardware replacement runs to End of Support, under a contract. CISA's BOD 26-02 targets end-of-support edge devices at US federal civilian agencies; our EOS Edge Device list includes the Juniper MX and M Series, and the BOD 26-04 and BOD 26-02 guide explains the directive.

What replaces them

Juniper's policy says an End of Life Notification may name recommended replacement products. The notifications for these models (TSB107750, TSB109955, TSB106476 and the older announcements) are linked from Juniper's page, which says a login is required, and we did not read them. The public milestones page names no successor, so this guide does not name one. The notification itself, or a Juniper account team, is the source for the recommended replacement and for any migration terms.

What to do

  1. Inventory by part number: Juniper dates part numbers, not model names. List each chassis, routing engine, fabric board, line card and power supply, and match it against the rows above or against Juniper's page.
  2. MX204, orders and contracts: the Last Order date, June 15, 2027, is the last date for purchase orders and, under Juniper's policy, for new support services contracts for the product. Check which End of Support date applies to each unit by its part number.
  3. MX2010 and MX2020: the systems are off order. Check that every chassis you intend to keep is on a contract, and order any spare chassis parts you need before the spares' Last Order date.
  4. MX104, MX150, MX10003 and MX10016: their End of Support dates are the nearest on this page. Budget the replacement to land before March 15, 2028 for the MX104, June 30, 2028 for the MX150 and April 3, 2029 for the MX10003 and MX10016.
  5. MX240, MX480 and MX960: no chassis date to plan against. Check the cards and routing engines in each chassis, and re-check Juniper's page; the Juniper MX and M Series page re-reads it at every build.
  6. Routers that stay in service past End of Support: independent maintainers can keep hardware running with parts and break-fix after the vendor's end of support. They do not supply the vendor's software or security fixes, so for a router that carries outside traffic replacement is the durable answer.
  7. Check every Juniper platform, not one: the EX Series, QFX Series and SRX Series pages carry the same milestones, and the EOL Checker answers for a single model.

Frequently Asked Questions

When is the Juniper MX204 end of life?

Juniper announced the end of life of the MX204 hardware in TSB107750, dated June 15, 2026. The Last Order date for the MX204 is June 15, 2027, the End of Engineering date for the MX204 is June 15, 2030 and the End of Support date for the MX204 hardware is June 30, 2032. The earlier part numbers MX204, MX204-IR, MX204-R and MX204-P-BASE are on separate rows of Juniper's page, and those rows carry an End of Support date of June 15, 2032.

When does the Juniper MX104 reach end of support?

Juniper's End of Support date for the MX104 is March 15, 2028. The Last Order date for the MX104 was March 15, 2023. On Juniper's row, Same Day Support Discontinued and Next Day Support Discontinued carry the same date as End of Support.

When does the Juniper MX150 reach end of support?

Juniper's End of Support date for the MX150 is June 30, 2028. The Last Order date for the MX150 was June 30, 2023.

When do the Juniper MX10003 and MX10016 reach end of support?

Juniper's End of Support date for the MX10003 and MX10016 is April 3, 2029. The Last Order date for the MX10003 and MX10016 was April 3, 2023. Juniper's rows give an earlier date, April 3, 2028, for Same Day Support Discontinued and Next Day Support Discontinued.

When is the Juniper MX2010 and MX2020 end of life?

Juniper announced the end of life of the MX2010 and MX2020 in TSB109955, dated August 15, 2026. The base and premium systems have a Last Order date of the same day, so they are no longer orderable. The End of Engineering date for the MX2010 and MX2020 is January 30, 2032 and the End of Support date for the MX2010 and MX2020 is January 30, 2033. Spare and packaging part numbers on the same notice have a later Last Order date.

When does the Juniper MX2008 reach end of support?

Juniper's End of Support date for the MX2008 is September 15, 2031, under End of Life notification TSB106476. The Last Order date for the MX2008 was September 15, 2026 and the End of Engineering date for the MX2008 is September 15, 2029. Juniper lists Junos OS 23.4 as the last software version, and its Junos OS dates page extends that release's dates for the MX2008 to the hardware dates.

Are the Juniper MX240, MX480 and MX960 end of life?

Juniper's page has no chassis row for the MX240, MX480 or MX960. It dates selected bundles, upgrade kit bundles and renamed part numbers for those chassis, not the chassis themselves. As read on the day this guide was published, Juniper had announced no Last Order, End of Engineering or End of Support date for the three chassis.

Related

© 2026 endoflife.ai · How we verify our dates · API · About