endoflife.ai
XCP-ng XCP-ng 8.3 XCP-ng 8.2 EOL Checker

XCP-ng 8.3 End of Life: November 30, 2028 (8.2: September 16, 2025)

By Scott Bissett  ·  Published: November 21, 2026  ·  Reference guide  ·  Dates and status words read on the day of publication from the XCP-ng project's documentation and blog.

XCP-ng 8.3 LTS reaches end of life on November 30, 2028, and XCP-ng 8.2 LTS reached end of life on September 16, 2025. Both dates are from the release history table in the XCP-ng documentation, where the column is named Support until. XCP-ng 8.3 is the one release the table lists with a status other than EOL: Full support, LTS. It was released on October 7, 2024. XCP-ng 8.2, 8.1, 8.0, 7.6, 7.5 and 7.4 are all listed as EOL.

Still on XCP-ng 8.2 or 8.2.1? The project's end-of-life announcement for 8.2 says there will be no more bug fixes nor security updates for the release, and that the currently supported release is XCP-ng 8.3 LTS. XCP-ng 8.2.1 is the same release under its full version number, so it is past end of life too.
Quick answer: The XCP-ng 8.3 end-of-life (EOL) date is November 30, 2028. XCP-ng 8.2 reached end of life (EOL) on September 16, 2025. Every XCP-ng version's release and end-of-support date is on the XCP-ng lifecycle page. Running a XCP-ng version that is past end of life? See the support options on this page ↓

Key Dates at a Glance

Running XCP-ng past end of life?
Extended support past the official EOL date exists for many products in this position — whether it covers XCP-ng is exactly what we check. Tell us where to reach you and we’ll reply with matched options and pricing guidance — or an honest “no vendor covers this.” Free, no obligation.

Free · No obligation · Independent — we track the dates, vendors don’t pay for placement · dates verified against vendor sources. See all support options →

XCP-ng release history

VersionReleasedStatusSupport until
XCP-ng 8.3 LTSOctober 7, 2024Full support, LTSNovember 30, 2028
XCP-ng 8.2 LTSNovember 18, 2020EOLSeptember 16, 2025
XCP-ng 8.1March 31, 2020EOLMarch 31, 2021
XCP-ng 8.0July 25, 2019EOLNovember 13, 2020
XCP-ng 7.6October 31, 2018EOLMarch 30, 2020
XCP-ng 7.5August 10, 2018EOLJuly 25, 2019
XCP-ng 7.4March 31, 2018EOLOctober 31, 2018

Column names and status words are the project's own, from the release history table in its documentation. The 8.2 row shows the day version 8.2.0 was released; the project lists a second day, February 28, 2022, for version 8.2.1.

What LTS and standard release mean for XCP-ng

The XCP-ng documentation describes three kinds of release and uses two status words in its table.

XCP-ng 8.3 did not start as an LTS release. Its release notes say it kept receiving feature updates after general availability and moved to the Long-Term Support model, with a more conservative approach to updates, on June 16, 2025. The project's announcement that day says the change is not a new release: a host already running XCP-ng 8.3 is on the LTS version, and standard package updates keep it current.

XCP-ng 8.2: how its end-of-life date was set

XCP-ng 8.2 was the project's first Long Term Support release. Its release notes say it was released on November 18, 2020 and based on Citrix Hypervisor 8.2. The version number moved from 8.2.0 to 8.2.1 on February 28, 2022, when the project published a large maintenance update with refreshed installation media. The project treats both numbers as one release.

The first end-of-life date for 8.2 was June 25, 2025. On the day XCP-ng 8.3 became an LTS release, the project extended 8.2 to September 16, 2025. The release history table gives the reason: a three-month gap between the LTS release of 8.3 and the end of support for 8.2. The table still shows the first date, struck through, next to the final one.

On September 16, 2025 the project published its end-of-life announcement for 8.2. The documentation page for 8.2 now opens with a warning that the release is EOL.

Moving from XCP-ng 8.2 to 8.3

The XCP-ng 8.3 release notes and the project's upgrade guide set out the path.

  1. Start from an up-to-date 8.2.1. The release notes list it as the recommended starting point. An upgrade is also possible from XCP-ng 8.0 or 8.1, or from a pre-release of 8.3.
  2. On anything older, go to 8.2.1 first. The release notes say a pool on an earlier release must be upgraded to XCP-ng 8.2.1 before it is upgraded to 8.3.
  3. Use the installation ISO. The release notes say only upgrades made with the installation ISO image are supported, and that an in-place upgrade with yum is not possible.
  4. Follow the order in the upgrade guide. Upgrade and reboot the pool master first, disable High Availability before you begin, and install the latest updates before and after the upgrade.
  5. Read the release notes before you begin. The project points to their sections on deprecations and removals, attention points and known issues. Pools that use XOSTOR storage have their own instructions and a dedicated upgrade ISO.

XCP-ng 8.3 is partly based on XenServer 8, the successor to Citrix Hypervisor 8.2 CU1, according to its release notes. Our XenServer and Citrix Hypervisor page lists that product's own dates.

Commercial support, in the project's words

The XCP-ng documentation describes XCP-ng as a community-driven open source project backed by Vates. The project's pages mention commercial support in two places that matter for end of life. The releases page says Vates does not offer commercial support for pre-releases until they are finalized. The end-of-life announcement for 8.2 tells people who need help moving to 8.3, or who cannot upgrade, to contact Vates about service offerings and extended support options. The pages read for this guide state no terms, prices or end date for those options, so none are given here.

Frequently Asked Questions

When does XCP-ng 8.3 reach end of life?

November 30, 2028. The release history table in the XCP-ng documentation lists 8.3 LTS with the status Full support, LTS and that date in its Support until column.

When did XCP-ng 8.2 reach end of life?

September 16, 2025. The project first set the date at June 25, 2025, then extended it so that 8.2 stayed supported for three months after XCP-ng 8.3 became an LTS release. The project's announcement says there will be no more bug fixes nor security updates for 8.2.

Is XCP-ng 8.2.1 still supported?

No. XCP-ng 8.2.1 is the same release as XCP-ng 8.2 LTS: the project renumbered 8.2.0 to 8.2.1 when it published a large maintenance update. It reached end of life with 8.2 on September 16, 2025.

Is XCP-ng 8.3 an LTS release?

Yes. XCP-ng 8.3 started as a standard release and moved to the Long-Term Support model on June 16, 2025. It was not a new release: a host already running XCP-ng 8.3 is on the LTS version and stays current with normal package updates.

How long are XCP-ng LTS releases supported?

The project says its LTS releases are typically supported for up to five years. XCP-ng 8.3 is the stated exception: it is supported until November 30, 2028, to make way for the next major release, XCP-ng 9.0.

Can I upgrade from XCP-ng 8.2 to XCP-ng 8.3?

Yes. The 8.3 release notes recommend upgrading from an up-to-date XCP-ng 8.2.1, and say only upgrades made with the installation ISO image are supported. Releases older than 8.0 must be upgraded to 8.2.1 first.

Is there a newer release than XCP-ng 8.3?

No. The project names XCP-ng 8.3 as its latest LTS and says there is currently no standard release. It says the next release will be XCP-ng 9.0 and gives no release date for it on the releases page.

Related

© 2026 endoflife.ai · How we verify our dates · API · About