Puppet Enterprise 2023.8 End of Life: April 27, 2027
Puppet Enterprise 2023.8 reaches end of life on April 27, 2027, the day Perforce's lifecycle policy gives for its end of maintenance and support (EOMS). The Puppet Enterprise Platform Support Lifecycle page lists three supported versions: PE 2026.y on the Latest track, PE 2025.y on the Latest-1 track, and PE 2023.8.z on a track it labels LTS (Final). PE 2023.8 was released on August 27, 2024. It is the last release series under Perforce's legacy Long-Term Support model, and Perforce says that model is retired when the series ends.
Key Dates at a Glance
- Puppet Enterprise 2026: released 2026-10-15; no end date published; track Latest
- Puppet Enterprise 2025: released 2024-12-12; limited active support from 2026-10-15; end of maintenance and support 2027-10-15; track Latest-1
- Puppet Enterprise 2023.8: released 2024-08-27; end of maintenance and support 2027-04-27; track LTS (Final)
- Puppet Enterprise 2021.7: released 2022-08-30; end of maintenance and support 2025-02-25; past EOMS
Puppet Enterprise versions and their support status
| Version | Release track | GA date | Limited active support from | End of life (EOMS) |
|---|---|---|---|---|
| PE 2026.y | Latest | October 15, 2026 | Not set yet | None published |
| PE 2025.y | Latest-1 | December 12, 2024 | October 15, 2026 | October 15, 2027 |
| PE 2023.8.z | LTS (Final) | August 27, 2024 | Does not apply | April 27, 2027 |
| PE 2021.7.z | Legacy LTS, past EOMS | August 30, 2022 | Does not apply | February 25, 2025 |
Track names and the first three rows are from the Currently Supported Versions table on Perforce's lifecycle policy page. The PE 2021.7 end date is from the same page's Component Support section; its GA date is from Perforce's release list. Perforce does not print an end date for PE 2026: it gives a rule instead, described below. Live status for every version is on our Puppet Enterprise page.
What Perforce's track and phase names mean
Perforce is moving Puppet Enterprise from a Short-Term and Long-Term Support model (STS and LTS) to a model it calls Latest / Latest-1. The lifecycle policy page says the new model applies to every release starting with PE 2026.0. PE 2023.8 is the one series still running under the old model.
- LTS, the legacy model. Perforce describes LTS releases as supported for up to two years, with feature improvements, security updates and defect fixes. After a new LTS version was released, the old one got a further six-month overlap support period for migration. PE 2023.8.z is the final LTS series, and its track label on the lifecycle page is LTS (Final).
- STS. The lifecycle page names the Short-Term Support model without defining it. Perforce's support portal schedule labels the PE 2023.0 to 2023.7 releases it lists as STS and gives each an EOMS date in 2023 or 2024. We do not track them as separate versions. All of them are older than PE 2023.8.
- Latest. The most recent major version, PE 2026. Perforce says it receives full active support for 12 months from its release date, or until a newer major version is released, whichever is later. Full active support covers new features and enhancements, security updates, defect fixes and technical support.
- Latest-1. The previous major version, PE 2025. When a new major version is released, the prior one moves to limited active support for 12 months. Limited active support covers security updates, defect fixes, minor changes and technical support.
- Overlap support. The label Perforce's release notes and its Upgrade paths page give PE 2023.8.z today. It is the migration period of the legacy model, described above.
- EOMS, end of maintenance and support. Perforce's word for the end of a track. The lifecycle page says versions past EOMS are no longer eligible for software support or maintenance, and it names new features, defect fixes and security patches. Perforce's Software End of Life Policy defines EOMS as the date it stops offering maintenance bug fixes and security updates and limits technical support.
On this site, the end-of-life date of a Puppet Enterprise version is its EOMS date. The lifecycle page adds one more rule for older releases: once PE 2023.8.z reaches EOMS, any Puppet Enterprise version older than Latest-1 is treated as past EOMS.
What is newer and supported
PE 2026 is the newest Puppet Enterprise version. It was released on October 15, 2026 and it is the version on the Latest track. Its release notes say it introduces support for Puppet 9. Perforce has published no end date for it. The rule is 12 months of full active support from release, or until the next major version ships, whichever is later, and then 12 months of limited active support as Latest-1. We show no date for PE 2026 until Perforce prints one.
PE 2025 is the Latest-1 version. It was released on December 12, 2024. Its limited active support began on October 15, 2026, the day PE 2026.0 was released, and Perforce's table says that support continues until October 15, 2027, after which PE 2025.y reaches EOMS.
That gives a PE 2023.8 owner two targets. PE 2025 is the documented next step, and its end date is later than PE 2023.8's. PE 2026 is the version that gets new features, and it has no end date yet.
What a PE 2023.8 owner should plan
Perforce publishes an Upgrade paths page and a list of upgrade cautions in the PE 2026 documentation. The table and steps below follow those two pages as read on the day of publication.
| If you are on | Perforce says upgrade to |
|---|---|
| PE 2023.8.z, labelled overlap support | The current PE 2025 release |
| The current PE 2025 release, labelled Latest-1 | The current PE 2026 release |
| An older PE 2025 or PE 2026 release | The current release of the same major version |
| PE 2021.7.z | PE 2023.8.z |
| PE 2021.y or PE 2019.8.z | PE 2021.7.z |
- Stay on the newest 2023.8.z release while you plan. Perforce's release list shows recent 2023.8.z releases shipping on the same days as PE 2025 and PE 2026 releases. The newest release of each series is on our Puppet Enterprise page.
- Pick the date you plan against. The lifecycle policy says April 27, 2027. The release notes say the overlap support period ends on February 27, 2027. Planning against the earlier date costs nothing if the later one turns out to be right.
- Plan two steps to reach PE 2026. The Upgrade paths page sends PE 2023.8.z to the current PE 2025 release, and the current PE 2025 release to the current PE 2026 release. It lists no direct path from PE 2023.8.z to PE 2026.
- Read the upgrade cautions before the first step. Perforce's list includes these: tasks and plans marked private in their metadata are not visible after upgrading from PE 2023.8.x to 2025.x; the PuppetDB plaintext listener on port 8080 is off by default beginning in PE 2025.12.0 and 2026.0; if you use Continuous Delivery for Puppet Enterprise, it needs to be on version 5.17.0 first; and Forge authorization tokens configured in an earlier version should be rotated after upgrading.
- Check the primary server's operating system. On the day we read them, Perforce's download pages for the newest PE 2023.8 and PE 2025 releases listed primary server packages for Amazon Linux 2 and Ubuntu 20.04. The page for the newest PE 2026 release listed neither. A primary server on one of those two systems needs an operating system move before PE 2026.
- Check your Puppet code against Puppet 9 before PE 2026. Perforce's Puppet Core lifecycle page associates Puppet 8 with PE 2023.8.x and 2025.x, and Puppet 9 with PE 2026.x. The PE 2026.0 release notes point to Perforce's Puppet 9 upgrade considerations.
- If you cannot move before the end date: the Puppet Enterprise lifecycle page lists nothing for PE 2023.8 after EOMS. Perforce's general Software End of Life Policy says it may offer extended maintenance or extended support for an additional fee. Whether that exists for PE 2023.8 is a question for Perforce. The Extended Agent Support named on the lifecycle page is a different thing: it covers agents on older operating systems such as RHEL 7, not an older Puppet Enterprise version.
- On PE 2021.7 or older: PE 2021.7.z reached EOMS on February 25, 2025. Perforce's path from there goes to PE 2023.8.z first, so the same two dates above apply to you as soon as you arrive.
The EOL Checker looks up one product and version.
Open source Puppet and Puppet Core
Puppet Enterprise is built on Puppet Core, and we track open source Puppet and Puppet Core separately on our Puppet page. Perforce's lifecycle page says the Puppet Core components inside a Puppet Enterprise release follow the maintenance and end-of-life timeline of that release track. Puppet 7, the line under PE 2021.7, reached end of life in April 2025. Perforce prints only projected end months for Puppet Core 8 and 9, so we show no end date for either yet.
Frequently Asked Questions
When does Puppet Enterprise 2023.8 reach end of life?
April 27, 2027. Perforce's lifecycle policy lists PE 2023.8.z as LTS (Final) and says it reaches end of maintenance and support (EOMS) on April 27, 2027. Perforce's PE 2026 release notes give an earlier date for the same series: they say its overlap support period ends on February 27, 2027.
Is Puppet Enterprise 2023.8 still supported?
Yes. It is one of the three versions on Perforce's list of currently supported versions, and Perforce still ships 2023.8.z releases. By the lifecycle policy that lasts until April 27, 2027.
Why do Perforce's pages show February 27, 2027 for PE 2023.8?
Perforce's PE 2026 release notes tell PE 2023.8 customers that the overlap support period ends on February 27, 2027. Its lifecycle policy page says PE 2023.8.z reaches EOMS on April 27, 2027. Perforce has not reconciled the two pages. We publish the lifecycle policy date and suggest planning against the earlier one.
When does Puppet Enterprise 2025 reach end of life?
October 15, 2027. PE 2025.y is on the Latest-1 track. Its limited active support began on October 15, 2026, the day PE 2026.0 was released, and Perforce says it reaches EOMS after October 15, 2027.
What is the newest Puppet Enterprise version?
PE 2026, released on October 15, 2026. It is on the Latest track, with full active support. Perforce has published no end date for it.
Can I upgrade from Puppet Enterprise 2023.8 straight to PE 2026?
Perforce's Upgrade paths page does not list that path. It sends 2023.8.z to the current PE 2025 release, and the current PE 2025 release to the current PE 2026 release. Plan the move in two steps unless Perforce tells you otherwise.
Is Puppet Enterprise 2021.7 still supported?
No. Perforce's lifecycle policy says PE 2021.7.z reached EOMS on February 25, 2025. Perforce says versions past EOMS are no longer eligible for defect fixes or security patches.
Related
- Puppet Enterprise — every tracked version, live status and EOL Risk Score
- Puppet — open source Puppet and Puppet Core
- Puppet CVE-2026-115731 — fixed versions for each supported line
- EOL Checker
- How we verify our dates